punch die
英 [pʌntʃ daɪ]
美 [pʌntʃ daɪ]
网络 金型模具; 冲切模具; 各式冲刀; 冲模; 冲压模具
双语例句
- Skill of Punch Die and Inner Ejector Outer Stripper Simultaneously to Process
线切割凸凹模同时加工及一次性加工内外卸料板技巧 - When the utility model drives the upper punch die by the slide block to proceed with the working, the lower punch power is bigger.
本实用新型经滑块带动上冲模进行工作时，下冲力较大。 - It designs a quick-change punch die structure, which can be used for combination punch die and flexible punch press system.
设计了一种可应用于组合冲模及柔性冲压系统的快换冲模机构。 - Study on punch die design and its production of magnesium alloy mobile telephone shell
镁合金的冲压模具设计研究 - Research in the method of establishing 3D graphic library of the standard units of punch die
冲模标准件三维图库的构建方法研究 - Similar cases retrieved from the CBR system of punch die
冲裁模CBR系统的相似实例检索 - Contrast and selection of punch die fabrication processes
冲模制造工艺的对比与选择 - In the paper, the general arranging method of the blanking parts on the sheet and calculation of the material utilization ratio by AutoCAD software have been discussed for punch die design.
论述采用Autocad软件辅助在冲模设计中冲裁件在板料上的布置的一般方法及其材料利用率的计算。 - This paper introduces the Principle, Structure and design of undosed rectangular section punch die.
介绍未封闭矩形截面冲裁模的原理、结构和设计。 - Process Planning for Punch Die CAD/ CAM System
模具CAD／CAM系统中的工艺设计 - The combination structure was adopted for both punch die and container with the cooling water channel.
该模具的凸模和凹模均采用组合结构，设有冷却水道。 - The feasibility and necessity were pointed out based on the analysis of a punching die design process and a whole frame of punch die structure design faced users based CBR was advanced.
介绍了CBR技术的基本原理和实现技术，提出了一个基于CBR的面向用户的冲裁模结构设计系统的总体框架。 - Step Layout Optimization Algorithm of High Precision Progressive Punch Die Based on Graph Theory
基于图论的高精度级进模跳步排样优化算法 - We first discussed the methods for establishing and developing a standardized parts database for 3D Punch die based on SolidWorks, and realized rapid display and drawing of parts under SolidWorks.
论述以SolidWorks为平台的三维网络图形数据库的开发，以及建立标准件库的思想和方法，实现了在SolidWorks中对模具标准件的快速绘制与显示。 - The repair classification and formation of repair cycle of punch die are introduced.
介绍了冲模的修理类别及其修理周期的构成； - Layout optimization is an essential point in CAD of high precision progressive punch die.
跳步排样是高精度级进模CAD中的重要组成部分。 - The acoustic emitting technique used for bulging friction process of punch VALLEY BULGING Life of Punch Die
声发射技术在凸模胀形摩擦问题中的应用 - Exploitation of Standard Parts Library for Punch Die Based on AutoCAD VBA
基于AUTOCADVBA冲模标准件库的开发 - A new style punch die without burrs is designed.
设计了一种新型无毛刺冲孔模具。 - Reasonable Use and Maintenance of NC Punch Die
数控冲床模具的合理使用与保养 - The evaluation methods of service life of punch die and the sharpening life as well as the life probability value are given.
给出了冲模使用寿命、刃磨寿命的评定办法及其寿命概略值。 - This paper discusses the gross structure of 3D graphic library of standard units of punch die, and probes into the method of further exploitation of SolidWorks with Delphi.
本文论述了基于SolidWorks的三维冲模标准件图库的总体结构，探讨了用Delphi对SolidWorks进行二次开发的方法。 - It is introduced that a barrel-type piece is given a curling using the combination between a slipping punch die and a fixing punch die. Die structure becomes simple and ingenious, which leads to higher production efficiency.
介绍了用可滑动凸模与固定凸模相结合对筒形件进行翻边，模具结构简单、巧妙，生产效率高。 - A case of punch die design is finally presented to verify the effectiveness and feasibility of the proposed method.
最后以冲裁模具设计过程为例，验证了上述方法的有效性和实用性。 - Life of Punch Die Punch dies on free forging hammer is designed, which expands the applied field of free forging equipment, and solves manufacturing problem without heavy-duty press.
设计了适合自由锻锤上厚板冲孔的模具，对在自由锻锤上厚板冲孔进行了有益的尝试，扩大了自由锻设备的加工范围，解决了不具备大型压力机情形下的生产难题。 - This paper mainly introduces the current technique condition of automobile cold punch die, and the characteristics of traditional CAPP system, as well as the technique design and management model for cold punch die factory.
介绍了汽车冷冲压模具行业工艺水平现状和传统CAPP系统特点，以及冷冲压模具厂工艺设计管理模式； - Development of punch die parametric design CAD software
冲裁模CAD系统参数化设计 - Design of New Style Punch Die Without Burrs
新型无毛刺冲孔模具的设计 - A new quick clamping technology of the punch die
冲模快速夹紧新技术 - The application of the CAD/ CAM system for cold punch die
冷冲模CAD/CAM系统的应用